> ## Documentation Index
> Fetch the complete documentation index at: https://docs.premierecopilot.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Smart Sync

> Line up every clip of your timeline on its sound in one click: cameras, external recorder, phone. Free, computed on your computer.

Smart Sync listens to your clips and lines them all up on their sound: several cameras, an external audio recorder, a phone. It finds where each clip goes to the millisecond, shows you the result before anything moves, then syncs the timeline in one click.

Everything runs **on your computer**: no file is uploaded, and it is **free**, no credits.

Works in **Premiere Pro** and **DaVinci Resolve**.

## Quick Start

**1. Put your clips on the timeline**

Place every camera and every recorder on its own tracks, roughly where they belong. They do not need to be close: Smart Sync finds the right place on its own.

**2. Choose the range**

Open **Smart Sync** and pick **Whole timeline**, **In / Out** or **Selected clips** (Premiere Pro). Under the choice, turn off the tracks to leave alone, like music, titles or B-roll.

**3. Find the sync**

Click **Find the sync**. Smart Sync reads the timeline, listens to the audio and finds the place of every clip.

**4. Check the preview**

Switch between **Before** and **After** to see each clip slide to its new place. Click a clip to read its details, or to keep it in place.

**5. Sync the timeline**

Click **Sync the timeline**. A copy of your sequence is saved first, and **Restore** brings it back in one click.

> [!WARNING]
>
> While the clips move, **don't touch Premiere Pro / DaVinci Resolve**. Smart Sync is driving your sequence.

## Range and tracks

| Range | Which clips are synced |
| - | - |
| **Whole timeline** | Every clip of the sequence. |
| **In / Out** | The clips that touch your In / Out range. |
| **Selected clips** | Only the clips you selected in the timeline. Premiere Pro only. |

The line under the range shows how many clips with sound will be synced. If you change the timeline, click the refresh icon to read it again.

**Tracks to sync**: one short button per track (V1, V2, A1, A2…), the full track name in its tooltip. Turn off the tracks to leave alone: their clips are neither listened to nor moved. A clip linked to a synced clip still moves with it, so a shot never loses its own sound.

> [!NOTE]
>
> Smart Sync needs at least **two clips with sound** in the range. Clips on a locked track, clips with a changed speed or direction, nested sequences and generated clips are left in place.

## How it finds the sync

1. **Reference**: Smart Sync picks the best recording as the reference. An external recorder or microphone wins when there is one (when it covers at least half of the longest clip), otherwise the longest clip is used.
2. **Listen**: each file is read once, only on the part used by its clips, without decoding the picture.
3. **Match**: every other clip is matched against the reference, or against a clip already placed. A clip that shares no sound with the reference can still be synced through another camera that does.

A clip with video moves by **whole frames**, so it stays on the frame grid. A sound-only clip moves to the exact position in Premiere Pro, and by whole frames in DaVinci Resolve.

> [!NOTE]
>
> Supported files: MP4 and MOV (AAC or uncompressed audio), WAV, and MP3. A file whose audio cannot be read is marked **To check** and does not stop the others.

## The preview

The preview shows your tracks the way the timeline does: video at the top, sound at the bottom. **After** shows every clip at its new place, **Before** at its current place. Zoom with the bar under it.

| Color | Meaning |
| - | - |
| **Reference** (★) | Everything is synced to this clip. |
| **Synced** | Found on its sound, it will move. A clip already in sync stays where it is. |
| **To check** | No common sound found, its place is taken by another clip on the same track, or its audio could not be read. It stays where it is. |
| **Left in place** | No sound to listen to, locked track, changed speed, nested sequence, or kept in place by you. |

Above the preview, the counters sum it up: clips **to move**, **already in sync**, **to check** and **left in place**.

**Click a clip** to read its details:

* how far it moves, in time and in frames;
* which clip it was synced on, with a **confidence** score;
* a **clock drift** warning when the two recordings run at slightly different speeds, with the error at the ends of the clip in frames.

Click **Keep in place** to leave a clip where it is, or **Sync it** to bring it back. The preview updates instantly, without listening again.

> [!TIP]
>
> Smart Sync never lets two clips overlap on a track. If the new place of a camera is taken by another clip, it stays in place and is marked **To check**: move the other clip or put the camera on its own track, then click **Listen again**.

## Mute the camera sound

When the reference is a sound-only recording (an external recorder, a lavalier), Smart Sync offers **Mute the camera sound**, with the tracks it will mute (A1, A2…). It is on by default: you keep the clean sound of the recorder, and the camera sound stays on the timeline, muted, in case you need it. In DaVinci Resolve, these tracks are disabled.

## Apply and restore

**Sync the timeline** saves a copy of your sequence, then moves the clips one group at a time: each clip with its linked clips, by the same amount. When it is done, the panel shows how many clips were synced, and **Restore** reopens the copy if you want the original back.

If nothing needs to move, the button stays off and Smart Sync tells you everything is already in sync.

## Common pitfalls

> [!WARNING]
>
> * **Fewer than two clips with sound** in the range: check the range and the tracks to sync.
> * **A camera with no usable sound** (muted, no microphone) has nothing to match: sync it by hand, or record a scratch track.
> * **Speed changed on a clip**: Smart Sync leaves it in place. Reset its speed to 100 %, sync, then change it again.
> * **Two cameras on the same track** can block each other: give each camera its own tracks.
> * **Long recordings with clock drift**: the clip is synced at its middle, and the drift warning tells you how many frames it moves away at the ends.

> [!TIP]
>
> Sync first, edit after: once your cameras and microphones are lined up, run [Podcast](https://docs.premierecopilot.com/features/multicam-editing.md) for the multicam edit, then [Claude Cut](https://docs.premierecopilot.com/features/claude-cut.md) or [Jump Cut](https://docs.premierecopilot.com/features/jump-cut.md).

## Support

Questions or feedback? Join the [Discord](https://discord.gg/WyBNCbZhBD) or write to [admin@premierecopilot.com](mailto:admin@premierecopilot.com).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.